ZyXEL Communications Prestige 100IH User Manual page 58

Set Name= Marc
Idx Local Start IP
--- ---------------
1. 0.0.0.0
2 Server Set= 1
3.
4.
5.
6.
7.
8.
9.
10.
The Type, Local and Global Start/End IPs are configured in Menu 15.1.1.1 (described
Ordering Your Rules
If there are any empty rules before your new configured rule, your configured rule will be pushed up by that
number of empty rules. For example, if you have already configured rules 1 to 6 in your current set and now
you configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9.
Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so as old rule 5 becomes rule 4, old rule 6
becomes rule 5 and old rule 7 becomes rule 6.
The description of the other fields is as described above. The Type, Local and Global Start/End IPs are
configured in Menu 15.1.1.1 (described later) and the values are displayed here.
Field
Set Name Enter a name for this set of rules. This is a required
field. Please note that if this field is left blank, the
entire set will be deleted.
There are 4 actions. The default is Edit. Edit means
Action
you want to edit a selected rule (see following field).
Insert Before means to insert a rule before the rule
selected. The rules after the selected rule will then be
moved down by one rule. Delete means to delete the
selected rule and then all the rules after the selected
4-10
Menu 15.1.1 - Address Mapping Rules
Local End IP Global Start IP
--------------- ---------------
255.255.255.255 0.0.0.0
0.0.0.0
Action= Edit Select Rule=
Press ENTER to Confirm or ESC to Cancel:
Figure 4-9 First Set in Menu 15.1.1
later) and the values are displayed here.
Table 4-4 Menu 15.1.1
Description
P100IH ISDN Router
Global End IP Type
--------------- ------
M-1
Server
Option
Marc
Edit
Insert Before
Delete and
Save Set
NAT