Table 11-7 Time And Date Setting Fields - ZyXEL Communications Prestige 100IH User Manual

P100IH ISDN Router
Field
Use Time Server when
Bootup=
Time Server IP
Address=
Current Time:
New Time
Current Date:
New Date
Time Zone= GMT+0800
Once you have filled in the new time and date, press [Enter] to save the setting and press [Esc] to
return to Menu 24.
System Maintenance
Table 11-7 Time and Date Setting Fields
Description
Enter the time service protocol that your timeserver will send when the
Prestige powers up. Choices are Daytime (RFC 867), Time (RFC-868),
NTP (RFC-1305) and None. The main differences between them are the
format, e.g., the Daytime (RFC 867) format is day/month/date/year/time
zone of the server while the Time (RFC-868) format gives a 4-byte
integer giving the total number of seconds since 1/1/1970 at 0:0:0. The
NTP (RFC-1305) format is similar. Not all timeservers support all
protocols, so you may have to check with your ISP/network administrator
or use trial and error to find a protocol that works. If you select None
(this is the default value), you can enter the time manually but each time
the system is booted, the time & date will be reset to 1970-1-1 0:0:0.
Enter the IP address of the your timeserver. Check with your
ISP/network administrator if you are unsure of this information.
Enter the new time in hour, minute and second format.
Enter the new date in year, month and date format.
Press the [SPACE BAR] to set the time difference between your time
zone and Greenwich mean Time (GMT). Be aware if/when daylight
savings time alters this time difference for your time zone.
11-25