Advanced Setup - ZyXEL Communications Prestige 100IH User Manual

PABX Outside Line
Prefix
Outgoing Calling
Party Number
Incoming Phone
Number Matching
Analog Call Routing
Global Analog Call
Edit Advanced
Setup
2.9.3

Advanced Setup

Select Yes in the Edit Advanced Setup field of Menu 2 – ISDN Setup to display menu 2.1 below.
ISDN Call Waiting
This allows you to place a call on hold while you answer another incoming call on the same telephone
(directory) number. By default call waiting is enabled on both telephone ports (except for France), but can
be disabled on either port from Menu 2.1
How to use call waiting
The Call Waiting feature on your ISDN line works in exactly the same way as it does on a regular analog
line. After hearing a call waiting indicator tone, press and immediately release the flash button on your
telephone. This puts your current call on hold and answers the incoming call.
Calling Line Indication
The Calling Line Indication, or Caller ID, governs whether the other party can see your number when you
call. If set to Enable, the Prestige sends the caller ID and the party you call can see your number; if it is
set to Disable, the caller ID is blocked.
2-12
Enter the number for outside line access if the Prestige is connected to
a PABX; otherwise, leave it blank. The maximum number of digits is
4.
You only need to fill in this field if your switch requires a specific
Outgoing Calling Party Number; otherwise, leave it blank.
Determines how incoming calls are routed. The choices for this field
are Multiple Subscriber Number (MSN), Called Party Subaddress
and Don't Care.
Select the destination for analog calls. The choices are A/B Adapter
1, A/B Adapter 2 and Ignore. This field is only applicable when
Incoming Phone Number Matching is Don't Care.
Select how to handle global analog calls. The choices are Accept and
Ignore. This field is not applicable when the Analog Call Routing is
Ignore.
Select Yes and press Enter to go to the advanced setup submenu
(DSS1 only).
P100IH ISDN Router
Hardware Installation and Setup