ZyXEL Communications Prestige 100IH User Manual page 93

P100IH ISDN Router
Recv. Authen
Compression
Mutual Authen
O/G Login
O/G Password
Multiple Link Options:
Max Trans Rate
Callback Budget
Management:
)
Allocated Budget (min
Period (hr)
Dial-In Server Configuration
This field sets the authentication protocol for incoming
calls. For security reason, setting authentication to none
is strongly discouraged. Options for this field are:
CHAP/PAP - Your Prestige will try CHAP first, but
PAP will be used if CHAP is not available.
CHAP – Use CHAP only.
PAP – Use PAP only.
None – Your Prestige tries to acquire CHAP/PAP
first, but no authentication is required if CHAP/PAP
is not available.
Turn on/off Stac Compression. The default for this field
is Off.
Some vendors, e.g., Cisco, require mutual
authentication, i.e., the node that initiates the call will
request a user name and password from the far end that
it is dialing to. If the remote node requires mutual
authentication, set this field to Yes.
Enter in the login name to be used to respond to the
peer's authentication request.
Enter in the outgoing password to be used to respond to
the peer's authentication request.
Enter the maximum data transfer rate between your
Prestige and the remote dial-in user. 64 - At most, one B
channel is used. 128 - A maximum of two channels can
be used. When the Prestige calls back to the remote
dial-in user, the maximum data transfer rate is always
64.
This field sets the budget callback time for all the remote
dial-in users. The default for this field is 0 for no budget
control.
This field sets the time interval to reset the above
callback budget control.
CHAP/PAP
CHAP
PAP
None
On
Off
Yes/No
64/128
Default = 0
7-5