ZyXEL Communications Prestige 100IH User Manual page 47

P100IH ISDN Router
Field
Telco Transfer
options: Type
Multilink
Idle Timeout
At this point, the SMT will ask if you wish to test the Internet connection. If you select Yes, your Prestige
will call the ISP to test the Internet connection. If the test fails, note the error message that you receive on the
screen and take the appropriate troubleshooting steps.
Internet Access
Description
may enter any server set number up to 10, but the first one is
used foe SUA only.
This field specifies the type of connection between the Prestige
and this remote node. Select 64K, or Leased.
The Prestige uses the PPP Multilink Protocol (PPP/MP) to
bundle multiple links in a single connection to boost the effective
throughput between two nodes. This option is only available if
the transfer type is 64K. See menu 11.2 for more details.
This value specifies the number of idle seconds that elapses
before the remote node is automatically disconnected. Idle
seconds is the period of time when no data is transmitted from
your Prestige. Administrative packets such as RIP are not
counted as data. This option only applies when the Prestige
initiates the call.
3-9