Initial Clear For Error Status - Sam4s ER-900 Series Operation & Programming Manual

Initial Clear for Error Status

CAUTION: Do not share this information with unauthorized users. Distribute the PGM Mode
key only to those you may want to perform this function.
The initial clear function allows you to exit any register activity and return to the
beginning or cleared state. Any transaction that is in progress will be exited and
totals for that transaction will not be updated.
Following are some reasons you may want to perform an initial clear:



Perform this procedure only as necessary. Contact your SAM4S dealer first if you
have questions about operating or programming your SAM4S ER-900.
To Perform an Initial Clear
1. Turn the power switch located on the right side of the register to OFF
2. Turn the control lock to the PGM position.
3. Press and hold the key position where the CASH key is located on the default
4. While continuing to hold the appropriate key, turn the power switch to the ON
5. The message "INITIAL CLEAR OK!" prints when the initial clear is complete.
16  Contents
The register is in an unknown state, and you wish to exit the current program or
transaction without following normal procedures.
You have performed a function that includes a compulsory activity and you wish to
bypass the compulsion.
An initial clear may be necessary as part of servicing, or troubleshooting
keyboard layout.
.