System Control Center; Accessing The System Control Center; Creating A Shortcut To The System Control Center - Hughes HX90 User Manual

Accessing the System Control Center

Creating a shortcut to the System Control Center

System Control Center

The System Control Center is a set of screens and links you can use to monitor your
broadband service and troubleshoot the satellite router in the event of a problem.
The System Control Center provides access to system status, configuration
information, and online documentation through a web browser on a computer
connected to the satellite router. Use the System Control Center to find system
information for configuring networks or to check system performance if the satellite
router does not seem to be functioning properly.
Prerequisites: To access the System Control Center, a computer with a web browser
installed must be connected to one of the satellite router's LAN ports. (Because the
System Control Center web site is hosted on the router, the computer does not have
to be connected to the Internet.)
To open the System Control Center, double-click the System Control Center shortcut
on your computer desktop, or follow these steps:
1. Open a web browser such as Internet Explorer.
2. In the browser address bar, type
and press
192.168.0.1
Note: To use
192.168.0.1
The System Control Center home page appears as shown in Figure 5 on page 18.
If you are unable to access the System Control Center, refer to Cannot access the
System Control Center on page 52.
You can create a Windows shortcut on your computer desktop for easy access to the
System Control Center home page.
Note: You may already have a shortcut to the System Control Center on your desktop
if your satellite router installer created one.
1. Open the System Control Center home page in a web browser.
www.systemcontrolcenter.com
Enter
.
, DHCP must be enabled on the computer.
Chapter 2 • System Control Center
Chapter 2
or
1039457-0001 Revision A
17