Configuring Windows Xp To Use Dhcp - Hughes HX90 User Manual

Configuring Windows XP to use DHCP

Appendix A • Computer settings
68
1039457-0001 Revision A
Properties
6. Click .
The Internet Protocol Properties dialog appears as shown in Figure 40.
Figure 40: Internet Protocol Properties – Windows Vista
7. Ensure that both the Obtain an IP address automatically and Obtain DNS server
address automatically options are selected.
OK
8. Click .
9. Confirm that you have an IP address:
a. Click Start > Run.
b. Type and click
cmd
c. Type
ipconfig/renew
d. Make sure an IP address is shown on the line that starts with IP Address.
1. From the Windows desktop, select Start > Settings > Control Panel.
Network
2. Double-click the
Note: If Control Panel is in category view, select
Connections
OK
.
Enter
and press
Dialup Connections
and
Network Connections
; then select
.
icon.
Network and Internet
.