Configuring Windows Vista To Use Dhcp - Hughes HX90 User Manual

Configuring Windows Vista to use DHCP

Appendix A • Computer settings
66
1039457-0001 Revision A
Properties
8. Click .
The Internet Protocol Properties dialog appears as shown in Figure 37.
Figure 37: Internet Protocol Properties – Windows 7
9. Ensure that both the Obtain an IP address automatically and Obtain DNS server
address automatically options are selected.
OK
10. Click .
Close
11. Click to close the Local Area Connection Properties dialog.
Close
12. Click to close the Local Area Connection status dialog.
13. Confirm that you have an IP address:
Win+R
a. Press (Windows key + R).
b. Type and click
cmd
c. In the command, type
d. Make sure an IP address is shown on the line that starts with
or
IPv6 Address
1. From the Windows desktop, select Start > Settings > Network Connections.
A list of network adapters appears as shown in Figure 35. The Local Area
Connection-NIC Card icon must appear under the LAN or High-Speed Internet
heading. If it does not, the network is not installed correctly.
Figure 38: Network connections – Windows Vista
OK
.
ipconfig/renew
.
Enter
and press .
IPv4 Address