Location Of The Receiver; Mounting The Receiver - DELTA DORE RADIO TYBOX PAC Installation Manual

Location of the receiver

The receiver must be positioned near the heat pump
control unit (e.g. Hydraulic module).
To avoid interference with the radio transmission, the
antenna must be free from any metallic elements
(cables, metallic covers, etc.).
- 6 -

Mounting the receiver

Removing the cover
To remove the cover, push the tab
and lift the cover.
Screw-
mounting
Mounted on a wall using the
screws and pegs suited to the
support
Mounting by double-sided
adhesive tape
If you fit the receiver using adhesive
tape, you must strictly follow the
installation recommendations
(see "location" section).
Ensure that the surface on which the
tape is applied is thoroughly clean
before attaching the tape.
2
1
- 7 -