Troubleshooting - DELTA DORE RADIO TYBOX PAC Installation Manual

Troubleshooting

Nothing is displayed on the room unit screen.
There is no power supply
Check the batteries.
The receiver does not accept orders from the transmitter.
• Check the transmission by performing a radio test.
• Move your transmitter if necessary.
• Repeat the radio-controlled association of the receiver with
the RADIO TYBOX.
The indication is displayed.
The batteries are low.
Change the batteries, making sure they are the right way
round.
The unit displays: dEF 6.
There is a communication fault between the RADIO TYBOX
and the RF 652 receiver.
Check the installation.
You wish to associate a home automation feature and the
screen displays ---- .
You have reached the maximum number of functions to asso-
ciate.
During the radio association, then device displays:
Zone rAd 1.
This menu is reserved.
Associate the receiver again from the rAd menu.
The device displays "CONF".
The parameter 1.08 is set to 1.
The setting is controlled by each radiator or coil fan
.
- 36 - - 37 -