Table of Contents
Advertisement
2. Installing the receiver
2.1 Location
The receiver must be installed at a minimum
distance of 20 cm from any metal surface (e.g.
the boiler), and about 1.50 m from the ground
to ensure there's a good radio link with the
transmitter.
2.2 Mounting / Connection
❶ First of all, switch off the power to your
installation.
❷ The receiver can be secured by suitably sized
screws or by adhesive (supplied).
❸ Connect the receiver
❹ Once the receiver is connected, turn on the
power to your installation.
REMINDER:
The Tybox 5300 consists of an X3D radio
transmitter and receiver that are pre-associated.
> 10 cm
~1,50 m
OFF
5A max. - 230V~
230V~
50 Hz
Electro-thermal
ON
L N
Directory
motor
3
Advertisement
Table of Contents
