1/ LOCATION
Since the temperature measurement sensor is
inside the box, you must install the thermostat
fl ush-mounting box:
- on an accessible wall at a height of 1.50 m
- away from heat sources (fi replaces, sunlight) and
draughts (windows, doors)
IMPORTANT: Do not install the thermostat on
a wall in contact with the outdoors or with an
unheated room (e.g. garage, etc.) The sleeve output
in the fl ush-mounting box must be blanked off (with
mastic) in order to avoid unwanted air movements
that could bias the sensor reading.
4
2/ CONNECTION
The diagrams provided are simplifi ed for greater
clarity. Protections and other accessories required
by standards are not illustrated. - Standard NF
C15-100 and good practice must be complied
with. Connected or nearby units must not
generate excessive interference
(directive 89/336/EEC).
2.1 Circulator control
L
N
2A max. / 230V~
Circulator
5
EN
2A m
2A m