Device compliant with the requirements of directives: 2004/108/CE (Electromagnetic Compatibility) and 2006/95/CE (Low-Voltage Safety). Because of changes in standards and equipment, the characteristics given in the text and the illustrations in this document are not binding unless confirmed by Delta Dore...
Presentation Warnings This thermostat lets you program your heating and • Carefully read these instructions prior to use. cooling system to Comfort or Economy mode. • Do not attempt to repair the unit yourself; an after-sales service is available. Contents Presentation .
Automatic mode Override Turn the knob to AUTO. In automatic mode, override is used to switch from Comfort to Economy mode (or conversely) until the Your thermostat will function according to the program. next program change. E.g. It is 15:30 and you would like to switch to Comfort mode before the set time (17:00).
Timer mode Continuous mode This mode is used to choose a set-point temperature This mode is used to choose a set-point temperature that remains constant. for a given amount of time. Turn the knob to Turn the knob to Adjustment of the duration from 15 minutes Choice of set-point to 72 hours (in increments of 15 minutes) temperature...
Absence mode Off Mode In COOL mode, there is no Frost Protection set point. This mode shuts down your system. The system will be shut down for the programmed Turn the knob to time. This mode lets you place your home under Frost Room Configuration Protection if you need to leave for several days.
Choosing the HEAT / COOL mode and Turn the knob to set-point temperature setting To set the cool mode, select the COOL mode: The comfort and economy set-point temperatures for Selection of the operation mode for the HEAT mode are independent from the comfort and the HEAT / COOL regulation economy set-point temperatures for the COOL mode.
Time setting Programming The HEAT mode and the COOL mode are Turn the knob to independent. The days flash. Create a Comfort program and an Economy program Press + or - to change the day, then press OK for each mode. to confirm and continue on to the next setting.
Page 8
E.g. Comfort from 6:00 to 8:00 and from 17:00 to 23:00 Programming The programming principle is the same for HEAT mode and COOL mode. comfort: periods during which the home is occupied, economy: periods during which the home is unoccupied. 3.
Programming Information button 6. To program the other mode (HEAT/COOL) In AUTO mode, pressing i once lets you know the current mode (if the heat pump is reversible). Turn the knob to Pressing i a second time gives you the temperature of Change the mode by pressing once on + or - the room or the set-point temperature according to the Press OK to confirm.
Replacing batteries Separate the thermostat from its base. Battery level symbol Replace the batteries, making sure they are the right way round. When the battery level symbol appears, you have around 1 month to change the batteries (two 1.5 V alkaline batteries, LR03 or AAA). The following precautions must be respected: - Ensure that the +/- polarities are correctly placed Position the thermostat...
The temperature displayed does not match the Troubleshooting temperature measured in the room (thermometer) Refer to the installation guide or contact your installer or our The purpose of this section is to help you quickly solve customer service department. the most common problems that you may encounter with your product during use.