Warnings
Carefully read these instructions prior to installation.
• The unit must be installed in compliance with
currently applicable standards.
• Always switch off the mains before installing or
servicing the unit.
• Do not attempt to repair the unit yourself; an after-
sales service is available.
• Check that the fastenings are suited to the surface
that the unit will be attached to (plasterboard, brick,
etc.).
• The diagrams provided are simplified for greater
clarity. The protective units and other accessories
required by the standards are not illustrated.
Standard UTE NF C15-100 and good practice must
be complied with. Connected or nearby equipment
must not generate excessive interference (directive
2004/108/EEC).
- 2 -
Contents
Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Screw-fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Reversible heat pump
With thermostat input + change-over . . . . . . . . . . 12
With 2 thermostat inputs (cool - heat) . . . . . . . . . . 13
Starting up . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . 16
- 3 -