1/ Location/Mounting - DELTA DORE DELTA 8000 TA BUS Installation Instructions Manual

1/ LOCATION/MOUNTING

Since the temperature measurement sensor is
inside the unit, you must install the thermostat
flush-mounting box:
- on an accessible wall at a height of 1.50 m
- away from heat sources (fireplaces, sunlight)
and draughts (windows, doors)
IMPORTANT: Do not install the thermostat on
a wall in contact with the outdoors or with an
unheated room (e.g. garage, etc.)
The sleeve output in the flush-mounting box must
be blanked off (with mastic) in order to avoid
unwanted air movements that would cause the
sensor reading to be inaccurate.
❶ Separate the unit from its base by pushing the
pin using a screwdriver.
❷ Connect the bus to the terminal on the base
❸ Mount the base to the flush-mounting box.
❹ Refit the thermostat back on its base.
4
~1,50 m
Mini 20 cm
1
3
4
EN
2
5