Correction Of The Measured Temperature - DELTA DORE RADIO TYBOX PAC Installation Manual

Correction possible from -5°C to +5°C
in increments of 0.1°C.
Correction of the
Press the + or - buttons to make
measured
changes, and confirm with the OK button.
temperature
E.g.
If the temperature displayed
by the unit is 19°C and the
temperature measured is
20°C, add 1°C to the display
and confirm by pressing OK.
Continuous set-point temperature
display (by default).
With this option, press i to display
Automatic
the room temperature.
mode
temperature
Continuous room temperature display.
display option
With this option, press i to display t
he set-point temperature.
minutes
minutes
Control time base
minutes (by default)
Closed in Cool mode (by default)
Selection of the
opening direction
for the change
Closed in Heat mode
-over relay
- 20 -
Radio association (menu R)
This menu lets you associate all the installation's
wireless products (transmitters and receivers) with the
RADIO TYBOX.
Go to the radio association menu
Turn the knob to , press the
perature
i
- then press the button for 5 seconds.
- press the R button.
Home automation features on the installation
Up to 8 products can be associated with the RADIO
TYBOX. The features are the following:
- operation with door/window magnetic contacts,
- operation with a TYXAL alarm central control unit
- operation with TYXAL or TYDOM remote controls
(Delta Dore),
- operation with a home automation transmitter
(e.g. TYDOM 310).
If you wish to associate one of these products, set the
following menu to the value 1.
No home automation features
Home automation
Home automation features
features on the
associated with the RADIO TYBOX
installation
i
button to display the tem-
- 21 -