DELTA DORE Tybox 1137 Installation And User Manual
  1. Manuals
  2. Brands
  3. DELTA DORE Manuals
  4. Thermostat
  5. Tybox 1137
  6. Installation and user manual

DELTA DORE Tybox 1137 Installation And User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Tybox 1137
www.deltadore.com
Contents
Installation
1.
Installing the transmitter ............................................................................................ 3
1.1
Location ...................................................................................................................................3
1.2 Mounting ..................................................................................................................................3
2.
Installing the receiver .................................................................................................. 4
2.1 Location ...................................................................................................................................4
2.2 Mounting/Connection .......................................................................................................4
3.
Time and date setting ................................................................................................. 4
4. Configuring your device (Menu 1) .............................................................................. 5
Menu 1-02 Programme duration ..............................................................................................5
Menu 1-03 Pre-heat activation/deactivation ....................................................................5
Menu 1-04 Selecting the way the receiver relay opens .................................................5
Menu 1-08 Controlling the Comfort temperature ............................................................5
Menu 1-09 Anti-seize activation/deactivation .................................................................6
5.
Configuring your device (Menu 2) ............................................................................. 7
Menu 2-01 Locking or unlocking the settings .....................................................................7
Menu 2-02 Correcting the measured temperature .........................................................7
Menu 2-05 12h/24h time format ..............................................................................................7
Menu 2-06 Automatic summer/winter changeover ........................................................8
Menu 2-07 Days until boiler/heat pump service reminder ...........................................8
Menu 2-08 Control time base ..................................................................................................8
Menu 2-11 Hysteresis setting (if 2-08 = tor) ...........................................................................8
6.
Associating to the Tydom app ................................................................................... 9
7.
Association with a door/window magnetic contact ............................................ 9
8.
Association with a phone transmitter ...................................................................... 9
Installation and User
Guide
1

Advertisement

Table of Contents
loading

Related Manuals for DELTA DORE Tybox 1137

Summary of Contents for DELTA DORE Tybox 1137

  • Page 1: Table Of Contents

    Installation and User Guide Tybox 1137 www.deltadore.com Contents Installation Installing the transmitter .................... 3 Location ...........................3 1.2 Mounting ..........................3 Installing the receiver ....................4 2.1 Location ...........................4 2.2 Mounting/Connection .......................4 Time and date setting ....................4 4. Configuring your device (Menu 1) ................5 Menu 1-02 Programme duration ....................5...
  • Page 2 Association with a repeater ..................10 10. Factory reset ......................... 10 11. Installation Assistance ....................11 11.1 Unpairing/re-associating the receiver with the transmitter ........11 11.2 Removing associations from the receiver ..............12 11.3 Radio quality test .........................12 12. Technical characteristics ................... 13 Description ........................

  • Page 3: Installing The Transmitter

    INSTALLATION 1. Installing the transmitter 1.1 Location The thermostat can be wall-mounted or placed ~1,50 m on a piece of furniture in a room where the temperature is to be regulated from, at a recommended height of 1.5m and away from any heat sources (fireplace, direct sunlight, etc.) or draughts (window, door, etc.).

  • Page 4: Installing The Receiver

    2. Installing the receiver > 20 cm 2.1 Location The receiver must be installed a minimum of 20 cm away from any metal surface (e.g. the boiler), and about 1.50 m from the ground to ensure an optimum radio link with the transmitter. ~1,50 m 2.2 Mounting/Connection ❶...

  • Page 5: Configuring Your Device (Menu 1)

    4. Configuring your device (Menu 1) >5s EXIT ❸ Press the 1 button. ❻ To exit the mode, turn the dial. ❶ Turn the dial to , then press the To change the various settings, button for 5 seconds (❷). press the + or - buttons (❹), then press OK to confirm the change and go to the next setting (❺).

  • Page 6: Menu 1-09 Anti-Seize Activation/Deactivation

    Menu 1-09 Anti-seize activation/deactivation Anti-seize can be used outside heating periods to regularly start up the circulator/boiler/heatpump during off periods (5 minutes/week). Default setting: Anti-seize off Anti-seize off Anti-seize on Menu 1-10 Selecting the programming type when connected to Tydom This menu is only available if your Tybox is linked with a Tydom smart home gateway.

  • Page 7: Configuring Your Device (Menu 2)

    5. Configuring your device (Menu 2) >5s EXIT ❸ Press the 2 button. ❻ To exit the mode, turn the dial. ❶ Turn the dial to , then press the To change the various settings, i button for 5 seconds (❷). press the + or - buttons (❹), then press OK to confirm the change and go to the next setting (❺).

  • Page 8: Menu 2-06 Automatic Summer/Winter Changeover

    Menu 2-06 Automatic summer/winter changeover Default setting: Automatic changeover No automatic changeover Menu 2-06 does not appear if your Tybox is Automatic changeover linked with the Tydom app (menu 1-10 = 1). Menu 2-07 Days until boiler/heat pump service reminder Must be reset after every service.

  • Page 9: Menu 2-17 Resetting The Boiler/Heat Pump Operating Hours Meter

    Open the Tydom app on your smartphone or tablet, then select: Settings -> My devices -> Add device -> Heating -> Hydraulic -> Tybox 1137 (RF6000 +) After associating with the Tydom app, the Tybox automatically activates programming via Tydom (menu 1-10 = 1), and removes access to menus 1-02, 1-03, 1-08, 2-05 and 2-06.

  • Page 10: Association With A Repeater

    9. Association with a repeater If the radio signal is weak and the transmitter cannot be moved closer to the receiver, you can add an X3D repeater (booster) to your installation (example: ERX 2000). > 3s ..>5s EXIT ❶...

  • Page 11: Installation Assistance

    11. Installation Assistance 11.1 Unpairing/re-associating the receiver with the transmitter If there’s a breakdown, you may need to unpair a product and/or re-associate a new one. Unpairing the transmitter from the receiver >5s >5s EXIT ❶ Turn the dial on the transmitter ❸...

  • Page 12: Removing Associations From The Receiver

    11.2 Removing associations from the receiver Hold down the button to remove the radio associations from the receiver. > 3s > 10s > 20s > 30s : The red LED flashes after 3 seconds. The receiver is in pairing/association mode. : If you continue holding down the button, the red LED flashes quickly after 10 seconds.

  • Page 13: Technical Characteristics

    12. Technical characteristics Transmitter RF 6000+ receiver • Power supply using 2 batteries: • Power supply 230 V ~, 50 Hz 2x1.5V Alkaline - Type LR03-AAA - Consumption: 0.5 VA • Class III insulation • Class II insulation • X3D transmission frequency: 868.7 MHz to 869.2 MHz •...

  • Page 14: Use

    1. Description Off mode Selector dial Absence mode Programme profile Manual mode Room AUTO Follows programming Day (1 = Monday) Date and time settings Time PROG Programming Current setpoint Adjusting Information setpoint temperature settings Comfort Low batteries Economy Frost protection 2.

  • Page 15: Override

    3. Override In AUTO mode, you can use the override to change the setpoint temperature until the next programmed point. Programming Override Operating mode type type Example: it is 15:30 and you would like to switch to Comfort mode before the set time (17:00). 15h30 Programming via the Comfort or...

  • Page 16: Time Setting

    5. Time setting 2021... EXIT ❽->❿ Set the hour then the minutes with + or -. ❶ Turn the dial to ⓫ Confirm with OK. ❷-> ❻ Set the day, month, year with + or -. ⓬ To exit the mode, turn the dial. ❼...

  • Page 17: Current Day

    7. Current day You can opt for weekly (PROGx7) or daily (PROGx1) PROG x 7 programming. PROG x 1 You can select your choice using the switch on the back of the device. You can programme in increments of one hour, 30 minutes or 15 minutes (menu 1-02).

  • Page 18: Programme Verification

    How to set a daily programme (PROG x7) EXIT ❶ Turn the dial to PROG. ❺ Create your programme by pressing Economy periods and ❷ Press + or - to choose the programme to Comfort periods. change. You can check your programme by ❸...

  • Page 19: Manual Mode

    8. Manual mode This mode is used to set a constant temperature (5 to 30°C) 30°C This setting may be restricted (menu 2-01 = 1). 5°C In this mode, all programming is ignored (Tybox and Tydom app), and so are manually triggered scenarios (Tydom) and voice assistant commands.

  • Page 20: Pre-Heat Function

    11. Pre-heat function When changing from Economy to Comfort temperature in AUTO mode, your thermostat will anticipate the rise in temperature so that it reaches the right temperature at the scheduled time. Example (see opposite): 6:30 am, Economy period, currently pre-heating to reach the temperature of 20°C at 8:00 The pre-heating function's speed and accuracy is based on the heater type used and its heating inertia.

  • Page 21: Troubleshooting

    14. Troubleshooting 14.1 What the receiver LEDs mean Signal type Diagnosis/Solutions The GREEN light is Power supply is on. constantly on The RED light is constantly The relay is closed. The receiver is requesting heat. The receiver is in association mode, ready to be linked. The RED LED is slowly Please refer to the "Associating to the Tydom app"...

  • Page 22: Changing Batteries

    Radio fault has been showing for over an hour. - The receiver has broken down or has no power - Check the power supply to your receiver. to it. - The transmitter is too far from the receiver. - Move the transmitter nearer to the receiver dEF 13 and/or test the radio transmission quality.

Table of Contents