Location; Mounting / Connection - DELTA DORE MINOR 11 Installation And User Manual

3- Location

The MINOR 11 thermostat is mounted flush-moun-
ted in a flush-mounted box. It should be placed in
a room whose temperature represents the mean
temperature, with a recommended height of 1.5 m
and it should be away from any heat sources
(fireworks, sunlight) and from air flows (window,
door, etc.).
To avoid unwanted air movements that would
distort the sensor measurement, the wire entry
into the flush-mounted box must be plugged
(mastic, glass wool, etc.).
Min. 40 cm
IMPORTANT: Do not install the MINOR 11 on a
wall in contact with the outside or in an unheated
room (e.g. garage, etc.).
Approx.
height
1.50 m
- 6 -

4- Mounting / Connection

To open the casing, slide
the moving tabs using a
screwdriver and remove the
front panel from the base to
be flush mounted.
Switch off the power
supply to the system
before carrying out any
operation
Before securing the base to the
flush-mounted box, pass the wires
through the hole in the base.
When the base is secured, connect
the wires to the terminal (strip the
wires: approx. 6 mm).
Moving
tabs
Fit back the cover and
lock it by pushing the
moving tabs
downward.
Switch on the
installation.
- 7 -
"Click"