Troubleshooting
Load manual feeder with [paper size]
Try one or more of the following:
•
Load the feeder with the correct paper size.
•
Depending on your printer model, touch Continue or press
Note: If no paper is loaded in the feeder when Continue or
the request, and then prints from an automatically selected tray.
•
Cancel the current job.
Load manual feeder with [paper type] [paper size]
Try one or more of the following:
•
Load the feeder with the correct paper size and type.
•
Depending on your printer model, touch Continue or press
Note: If no paper is loaded in the feeder when Continue or
the request, and then prints from an automatically selected tray.
•
Cancel the current job.
Paper changes needed
Try one or more of the following:
•
Select Use current supplies to clear the message. For non‑touch‑screen printer models, press
•
Cancel the current print job.
Remove packaging material, [area name]
1
Remove any remaining packaging material from the specified location.
2
Select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press
confirm.
Remove paper from standard output bin
1
Remove paper stack from the standard output bin.
2
Select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press
confirm.
to clear the message and continue printing.
is selected, then the printer manually overrides
to clear the message and continue printing.
is selected, then the printer manually overrides
220
to confirm.
to
to