Uicc Removal - Lexmark X925 7541-03 series Service Manual

7541-03x

UICC removal

1.
Remove the upper operator panel top cover. See
2.
Disconnect the haptics cable (A) from the UICC.
3.
Remove the UICC cable (B) from the UICC.
4.
Disconnect the ribbon cable (C) from the UICC.
5.
Remove the four screws (D) securing the UICC to the upper operator panel assembly.
Note: When reattaching the UICC cable to the display and the UICC card,ensure that the end of the cable with
the black tape to the display.
4-120
Service Manual
"Op panel top cover" on page 4-13.
Previous
Next
Go Back