Position Build Piston (Build Bed); Cover - 3D Systems ProJet 660Pro User Manual

ProJet 860Pro User Guide Additional Operations
®

5.7 Position Build Piston (Build Bed)

The Build Bed platform must be in its proper position at the top of the Build Bed in order for the printer to fill
the bed and spread a layer of Core before starting a print job. If you see the message RAISE BUILD in the
Printer Status dialog, go to the printer and select PREP BUILD CHAMBER to raise the platform to its
proper position.
If you have taken out the Removable Build Plate, use the menu item to raise up
ACCESS BUILD PLATE
the platform so you can put the Build Plate back into position.

5.8 Cover

The printer cannot start a print job when the top cover is open. If the top cover is open, go to the printer and
close it. Do not open the cover while the machine is printing.
3dscentral.3dsystems.com 46 All Rights Reserved
5/12/13