Table of Contents
Advertisement
®
ProJet
x60 Series User Guide
4 Post-Processing
After your 3D model is dry and fine cleaned, it can be infiltrated. When high strength is not critical, Water
Cure is a quick, easy way to finish parts. The best concept models are made using ColorBond™. Strength-
Max™ Epoxy will confer superior strength for functional models.
4.1 Post-Processing Using Water Cure
Water cure with Epsom salt is the best way to finish concept models quickly and easily. No hazardous or
restricted chemicals are involved: simply dissolve the Epsom salt into tap water and spray a fine mist over
the surface of your parts to give them a smooth, hard surface and a bright white appearance.
The Water Cure with Epsom salt method applies to all parts printed using VisiJet PXL Core.
Water Cure with Epsom salt can be used on color parts but colors will remain slightly muted.
For complete details on water infiltration, see the VisiJet PXL User Guide.
4.2 Post-Processing With ColorBond™
This section briefly describes post-processing a part using ColorBond Instant Infiltrant. The infiltrant soaks
into the newly-printed part and bonds the printed Core together. This both strengthens the part and gives it
more durability.
ColorBond is available in larger bottles for use in the dipping method. For parts with delicate features,
smaller bottles of ColorBond are available for drizzling onto a part.
Safety Precautions
•
Read and understand the Material Safety Data Sheet before using or handling this product.
•
Wear a lab coat or smock, gloves, face shield, or goggles.
•
Apply in a well-ventilated area.
•
Specialized containers are recommended for applying ColorBond. Have a catch pan, waxed
paper, or plastic drop cloth available for catching spills.
•
Label disposal materials and dispose of according to the label instructions.
•
Wear a dust mask when sanding finished parts.
•
ColorBond reacts with water and ambient moisture. Once a bottle has been opened, it is recom-
mended that the product be used within 30 days. Avoid all contact with water and avoid use under
high humidity conditions. If ColorBond is exposed to excessive humidity, it will thicken up and
become unusable for infiltration.
•
Store ColorBond in a cool, dry area.
For complete details on post-processing your part using ColorBond, see the ColorBond User Guide,
available at 3dscentral.3dsystems.com.
4.3 Post-Processing With StrengthMax™
This section briefly describes post-processing a part using StrengthMax Infiltrant. The infiltrant soaks into
the newly-printed part and bonds the printed Core together. This both strengthens the part and gives it
more durability.
Safety Precautions
•
Read and understand the Material Safety Data Sheet before using or handling this product.
3dscentral.3dsystems.com
5/12/13
36
Post-Processing
All Rights Reserved
Advertisement
Table of Contents
