Table of Contents
Advertisement
®
ProJet
x60Pro User Manual
3.4 Clean The Fast Axis Rails and Carriage
Keeping the Fast Axis Rails and Carriage clean will keep the Carriage moving smoothly and thus optimize
printing accuracy.
1. Pull the Fast Axis toward you.
2. Using a paper towel dampened with distilled water, wipe the top and bottom Rails to remove any Core.
Move the Carriage back and forth as needed to clean the entire length of both rails.
3. Dry the Rails thoroughly using a clean dry paper towel.
4. Using a fresh paper towel, wipe the Carriage to remove any Core.
5. Wipe or vacuum the Build Bed and Deck as needed to remove any Core dislodged from the Rails and
Carriage.
3dscentral.3dsystems.com
5/12/13
Number
Component
1
Bottom Rail
2
Top Rail
31
Routine Cleaning
All Rights Reserved
Advertisement
Table of Contents
