Clean The Slow Axis Rails And Pulleys - 3D Systems ProJet 660Pro User Manual

ZPrinter 850 User Manual Printer Maintenance
®

6.7 Clean The Slow Axis Rails and Pulleys

Frequency: On a regular schedule, depending on your usage. Or, whenever the printer has problems or
errors related to the Slow Axis motion.
1. Unsnap the top deck from the chassis by pulling up at the front edge.
2. Lift up the front edge of the deck and slide the deck out toward you. Remove the deck from the printer.
3dscentral.3dsystems.com 56 All Rights Reserved
5/12/13