Table of Contents
Advertisement
®
ProJet
x60Pro User Manual
3.3 Clean The Parking Caps
The Parking Caps keep the print heads from drying out between print jobs. Cleaning the Parking Caps
after every build results in longer lasting print heads and precise accuracy during printing.
The Parking Caps are located on the right end of the Fast Axis.
Before you begin:
•
Get several dry paper towels.
•
Get the squirt bottle included in your Accessories Kit.
•
Fill the squirt bottle with distilled water.
•
Wear disposable gloves.
1. Pull the Fast Axis toward you and slide the Printhead Carriage to the left to expose the Parking Caps.
2. Lay paper towels on the Build Bed under and around the Parking Caps.
3. Cover the Front Overflow with paper towels.
3dscentral.3dsystems.com
5/12/13
28
Routine Cleaning
All Rights Reserved
Advertisement
Table of Contents
