Table of Contents
Advertisement
ZPrinter
850 User Manual
®
3. On the LCD select
VACUUM
rails.
4. Using a paper towel dampened with distilled water clean the slow axis rails on both sides. Carefully
clean any debris from the ends of the left rail (see also next step). Dry both rails thoroughly with a
clean dry paper towel.
3dscentral.3dsystems.com
5/12/13
to turn the vacuum on. Thoroughly vacuum the area around the slow axis
Number
Component
1
Slow Axis Rails
2
Ends of Rail
57
Printer Maintenance
All Rights Reserved
Advertisement
Table of Contents
