Table of Contents
Advertisement
ProJet
860Pro User Manual
®
7.12.2 Binder Cartridge is Full But 3DPrint Indicates Empty
Explanation: This is usually caused by a damaged binder cartridge, or a failure in the binder cartridge
pocket.
Solution:
•
Remove and reseat the binder cartridge. Check the following:
•
Be sure it's the correct cartridge for that pocket.
•
Check the label to be sure it's oriented correctly.
•
Snap it fully into place in the pocket.
If that doesn't solve the problem, try a new binder cartridge.
If a new binder cartridge doesn't solve the problem, contact your Service Provider.
3dscentral.3dsystems.com
5/12/13
Troubleshooting the ProJet x60Pro
77
All Rights Reserved
Advertisement
Table of Contents
