Table of Contents
Advertisement
ProJet
860Pro User Guide
®
6. Lift the print heads to be replaced out of their slots and properly recycle or dispose of any empty car-
tridge(s).
7. Get an alcohol swab (included with your Startup Kit). Snap it to break the glass inside, and squeeze
the tube to saturate the swab
.
8. For each printhead being replaced, wipe off all the pogo pins (inside the carriage) with the alcohol
swab. Use additional swabs if needed.
3dscentral.3dsystems.com
5/12/13
41
Additional Operations
All Rights Reserved
Advertisement
Table of Contents
