System Setup - Response SA5 E Installation And Operating Instructions Manual

System Setup

2-1 Learn House 2-3 Wirefree
Code Siren: xxx
Press DISARM on
Select
Remote... ON->1
2-2 ALARM TIME
xxx : xxxs
2-2-1 Status 2-2-2 Time
xxx Enter 1-60(x10)s
Enter 1-60(x10)s
Select
ON->1 OFF->3
Scroll through the top level programming menu until
'2. SYSTEM SETUP' is displayed and press
Note: fter completing the system setup press
to return to the top level programming menu.
Learn System House Code
Scroll through the menu until '2-1 Learn House Code'
is displayed.
To program the Control Panel with the system House
Code press .
Press on the Remote Control.
The new programmed system house code will be
recorded into memory and displayed on the
bottom line of the LCD, with the corresponding
DIP switch number shown on the top line.
Make a note of the system house code now in the
space provided on page 40.
Press to exit.
ESC
larm Duration
Scroll through the menu until '2-2
displayed. The current settings will also be displayed.
To change the settings press
On/Off Status
Default setting: ON
2. SYSTEM SETUP
2-5 Back Light
xxs
10s
OFF->3
20s
30s
60s
select menu item
...press ENTER
2-4 RF Jamming 2-6 Alarm Relay
Detection: xxx xxxxxxxxxxxxxx
Select
ON->1 OFF->3
ON until Disarm
select menu item
L RM TIME' is
.
PROGRAM MODE
CODE:
2-7 Zone Lockout
xxx
Select
ON->1 OFF->3
2-8 Remote Phone
Control: xxx
2s Select
ON->1 OFF->3
30s
60s
180s
300s
...press ENTER
Scroll through the menu until '2-2-1 Status' is
displayed. The current settings will also be displayed.
.
To change the setting press
ESC
Press
Press
larm Duration
Default setting: 180 seconds
Scroll through the menu until '2-2-2 Time' is
displayed.
To change the setting press
Enter the required alarm duration in units of 10s.
e.g. enter 6 for a 60s alarm duration (max
setting 60, i.e. 600s/10mins).
Press
Press
Press
ESC
Note: Following initiation of a Full
the External Siren will continue to sound until either
the system is Disarmed; or the Control Panel
Duration Time expires; or if activated until the 3 minute
alarm time limit of the external Siren expires; whichever
occurs first.
23
2-9 Rings to 2-11 Dial Method
Answer Phone: xx xxxxxxxxx
Enter 1-30: Tone/DTMF
Pulse
select menu item
...press ENTER
2-10 Call Abort
xxx
Select
ON->1 OFF->3
1
to enable the Siren, or
3
to disable the Siren.
to save and exit, or
to exit without saving.
ESC
to return to top level System Setup menu.
2-12 Dialler Mode
xxxxxxxxxxxxxx
Voice Dialler
Remote Manager
select menu item
...press ENTER
.
.
larm condition
larm