Latch Key Setup - Response SA5 E Installation And Operating Instructions Manual

Time
Scroll through the menu until '8-2 Time' is displayed.
The current setting will also be displayed.
To change the setting press
Enter the time in the format 'hh:mm:ss'.
Press to save and exit, or
Press to exit without saving.
ESC

Latch Key Setup

PROGRAM MODE
Code:
9. LATCH KEY
SETUP
9-1 Status 9-2 SELECTED
xxxxxxxxxxxxxx USER SETUP
OFF
Selective-Users
All-Users
select menu item
...press ENTER
User 1 Status User 3 Status
xxx xxx
Select Select
ON->1 OFF->3 ON->1
User 2 Status
xxx
Select
ON->1 OFF->3
Scroll through the top level programming menu until
'9. L TCH KEY SETUP' is displayed and press
Note: fter completing the Latch Key Setup press
to return to the top level programming menu.
Status
This sets the users that the Latch Key facility will
operate with. If set to 'Selected-Users' the Latch Key
will only operate with those users enabled in section
'9-2 Selected User Setup'.
Default Setting: OFF
Scroll through the menu until '9-1 Status' is displayed.
The current setting will also be displayed.
To change the setting press
Scroll through the available options, (Off, Selected-
Users and ll-Users), until the required setting is
displayed.
.
9-3 PHONE
NUMBERS
Phone No.1 Phone No.2
xxxxxxxxxxxxxx xxxxxxxxxxxxxx
Enter Phone No: Enter Phone No:
User 5 Status
xxx
Select
OFF->3 ON->1 OFF->3
User 4 Status User 6 Status
xxx xxx
Select Select
ON->1 OFF->3 ON->1
.
Press
ESC
Press
Selected-Users Setup
This allows controls over which users the Latch Key
facility operates with when set to 'Selected-Users'.
Default setting: OFF
Scroll through the menu until '9-2 SELECTED USER
SETUP' is displayed and press
Scroll through the menu until the required user number
(1- 6) to be configured is displayed. The current status
will also be displayed.
To change the setting press
1
Press
or
3
Press
fter configuring all Users as required press
return to the top Level Latch Key Setup menu.
Telephone Numbers
Scroll through the menu until '9-3 PHONE NUMBERS'
is displayed and press
Scroll through the menu until the required Telephone
OFF->3
number (1-2) is displayed. The current setting will also
be displayed.
.
To change the number press
Enter the new telephone number (32 digits max).
Press
Press
Notes:
Press
dialing sequence.
Press
Press
Press
cursor.
Press and hold
number.
fter programming all required phone numbers press
to return to the top level Latch Key Setup menu.
ESC
33
to save and exit, or
to exit without saving.
.
to enable the Latch-Key for the user,
to disable the Latch-Key for the user.
.
to save and exit, or
to exit without saving.
ESC
to insert a 3.5 second pause in the
to move the cursor left.
to move the cursor right.
to delete the character under the
to erase the entire phone
.
to
ESC
.