Home Utomation Setup; Nswer Phone Setup; Remote Manager Setup - Response SA5 E Installation And Operating Instructions Manual

Home utomation Setup

This feature is not available for use in the UK.

nswer Phone Setup

11-1 Status 11-2 Record
xxx
Select
ON->1 OFF->3 YES->1
Scroll through the programming menu until '11.
NSWER PHONE SETUP' is displayed and press
.
Note: fter completing the nswer Phone Setup press
to return to the top level programming menu.
ESC
On/Off Status
Default Setting: OFF
Scroll through the menu until '11-1 Status' is
displayed. The current setting will also be displayed.
To change the setting press
1
Press to enable the nswer-Phone, or
3
Press to disable the nswer-Phone.
Record Greeting
Scroll through the menu until '11-2 Record Greeting'
is displayed.
To record a new greeting message press
1
Press to start the voice recorder, (max
duration: 12 seconds).
recording will automatically be played back, or
3
Press to exit without changing
Note: fter recording the greeting message, press
to stop the recorder and cancel any remaining
ESC
message time.
Replay Greeting
Scroll through the menu until '11-3 Replay Greeting' is
displayed.
To replay the recorded greeting message press
PROGRAM MODE
Code:
11. ANSWER PHONE
SETUP
11-3 Replay
Greeting
Greeting
Start... Playing...
NO->3
.
Once completed the

Remote Manager Setup

Scroll through the menu until '12. REMOTE
M N GER SETUP' is displayed and press
Note: fter completing the Remote Manager setup
press
ESC
menu.
Telephone Number:
Scroll through the menu until '12-1 Phone No:' is
displayed. The current setting will also be displayed.
To change the setting press
Enter the new telephone number (32 digits max).
Press
Press
Notes:
Press
dialing sequence.
Press
Press
Press
cursor.
.
Press and hold
number.
Unit ID
Scroll through the menu until '12-2 Unit ID No:' is
displayed. The current setting will also be displayed.
To change the setting press
Enter the System ID Code (8 digits max) obtained from
the Service provider. (This is not to be confused with
the system house code).
Press
. Press
34
PROGRAM MODE
Code:
12. REMOTE
MANAGER SETUP
12-1 Phone No: 12-2 Unit ID No:
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx
Enter Phone No: Enter Unit ID:
to return to the top level programming
.
to save and exit, or
to exit without saving.
ESC
to insert a 3.5 seconds pause in the
to move the cursor left.
to move the cursor right.
to delete the character under the
to erase the entire phone
.
to save and exit, or
to exit without saving.
ESC
.