Call Routing - Response SA5 E Installation And Operating Instructions Manual

Notes:
Press to insert a 3.5 second pause in the
dialing sequence.
Press to move the cursor left.
Press to move the cursor right.
Press to delete the character under the
cursor.
Press and hold
number.
fter programming all required phone numbers press
to return to the top level Voice Dialler menu.
ESC
larm Message Play Time
This is the total time for which the alarm messages will
be played & repeated when a call made by the voice
dialler is answered.
Default setting: 70 seconds
Scroll through the menu until '4-2 Message Play Time'
is displayed. The current settings will also be displayed.
To change the settings press
Scroll through the available options, (50s, 70s, 90s
and 110s) until the required setting is displayed.
Press to save and exit, or
Press to exit without saving.
ESC
Record larm Messages
Scroll through the menu until '4-3 RECORD VOICE' is
displayed and press
Scroll through the available menu options until the
required message type to be recorded is displayed.
a) Main larm message, (12 seconds max).
b) Intruder larm message, (4 seconds max).
c) Fire larm message, (4 seconds max).
d) Panic/P larm message, (4 seconds max).
To record a new message press
1
Press to start the voice recorder. Once
completed the recording will automatically be
replayed, or
3
Press to exit without changing.
to erase the entire phone
.
.
.
Note: fter recording the message, press
to stop the recorder and cancel any remaining
message time.
Press to return to the top level Voice Dialler
ESC
setup menu.
Replay larm Messages
Scroll through the menu until '4-4 REPL Y
MESS GES' is displayed and press
Scroll through the available menu options until the
required message type is displayed.
a) Main + Intruder Messages
b) Main + Fire Messages
c) Main + Panic/P Messages
To replay the message press
Press to return to the top level Voice Dialler menu.
ESC

Call Routing

This feature controls which telephone numbers are
enabled in the dialing sequence and are dialed when
the voice dialler is activated.
The current routing sequence is displayed on screen
in the order of phone numbers 1- 4.
the number is disabled and a 'O' indicates the
number is enabled in the routing sequence. e.g.
display = "OOOx" indicates a call sequence of
phone nos. 1, 2 and 3, phone number 4 is disabled
and not called.
Default setting: all numbers disabled.
Scroll through the menu until '4-5 C LL ROUTING' is
displayed. The current settings will also be displayed.
Scroll through the available menu options until the
required telephone number (1-4) to be configured is
displayed. The current status will also be displayed.
To change the setting press
1
Press to enable the number in the routing
sequence, or
3
Press to disable the number in the routing
sequence.
Press to return to the top level Voice Dialler
ESC
Setup menu.
29
ESC
L RM
.
.
n "X" indicates
.