imagistics C400 Operating Manual page 94

4
Using the Programming Mode
Chapter
Key Operator
Expo. Mode Priority
2/6
Specify the default exposure mode selected automatically
when power is turned ON or panel reset, either "Auto" or
"Manual."
The initial setting is "Auto."
Expo. Level Priority:
Auto; Select the default exposure level in the Auto Exposure
mode, either
"Lighter," "Normal," or "Darker."
The initial setting is "Normal."
Manual; Set the default exposure level in the Manual
Exposure mode.
The initial setting is "Normal."
Manual Expo. Adjust:
Determine the default exposure-level-adjusting-increments
in the Manual Exposure mode, as optimized by the type of
original.
"Mode 1":
For users who frequently use originals with halftone
images, such as photos.
"Mode 2":
For users who use a wide range of types of originals.
"Mode 3":
For users who frequently use originals with a colored
background or light text.
The initial setting is "Mode 1."
Finishing Priority:
Select the default finishing type when the copier is
equipped with a Sorter or Staple Sorter, either "Non-Sort,"
"Sort,"
"Batch," "Sort Staple," "Non-Sort + Hole Punch," "Sort +
Hole Punch,"
"Batch + Hole Punch," or "Sort Staple + Hole Punch."
85