imagistics C400 Operating Manual page 97

4
Chapter
Key Operator
Orig.Copy Default:
6/6
Select the type of Orig.Copy setting selected
automatically when the copier is turned ON or panel reset.
The initial setting is 1
When the copier is equipped with a Duplex Unit, the
initial setting is 12. Consult your Technical Representative if
you want to set 11 for Orig.Copy Default.
Auto Power-OFF Mode:
Select the time it takes the Auto Power-OFF function
to be activated, from 1 min. to 240 min. in 1-min. increments. Auto
Power- OFF shuts down the copier a given period of time after the
last operation.
Initial Settings:
C400, 60min
C550, 90min
Consult your Technical Representative if you want to
disable this function.
Original on Glass:
Select whether to turn "ON" or "OFF" the beep that
sounds when you attempt to load an original in the document feeder
with another one left on the glass.
Administrator Mode:
This mode is used only by the administrator of your
copier. When Administrator Mode is selected, the copier prompts you
to enter your "Admin. #" (administrator number). The following functions
can be set only when the correct administrator number is entered. The
administrator number is set by the Technical Representative. For
more details, consult your Technical Representative.
Copy Track :
This function allows the administrator to keep track
of the number of copies made by each account.
Select either "OFF," "100 Accounts," or "1000 Accounts."
The initial setting is "OFF."
When "100 Accounts" is selected:
ID #: You can program or change your access number (for a max. of 100
accounts).
Limit: You can limit the maximum number of copies that can
be made.
Total: Displays the count of the Total Counter.You can also clear the counter.
Size: Displays the count of the Size Counter. You can also clear the counter.
When "1000 Accounts" is selected:
Total: Displays the count of the Total Counter. You can also clear the counter.
88
Using the Programming Mode
➧
1.