Auxiliary Functions; Panel Resetting; Auto Panel Reset; Auto Copy Start - imagistics C400 Operating Manual

2
Overview
Chapter

Auxiliary Functions

Panel Resetting

The Normal Mode (Reset) key resets all
control panel settings to default settings
including the number of copies and zoom
ratio.
If a document feeder is used,
an original left on the glass will be
ejected out of the unit.
Useful Tip:
To avoid miscopy, press the Reset key
before making any settings for your
copy job.

Auto Panel Reset

If no key on the control panel is pressed
within 60 sec. after a copy cycle has been
completed copying settings made, the Auto
Panel Reset function is activated to return
the copier to the default settings.
Useful Tip: The time for the copier to
enter the Auto Panel Reset Function can
be changed to 30 sec. p. 86

Auto Copy Start

If you load originals in the document feeder
and press the Start Key while the copier is
warming up after it has been turned ON, the
Auto Copy Start function allows that copy
process to be started as soon as the copier
completes warming up.
21
Auto Power-OFF
The Auto-Power OFF function shuts
down the copier a given period time after
the copier has been last used.
Useful Tip: The time for the copier to
enter the Auto Power-OFF mode can be
selected from 1 to 240 min. The Auto
Power OFF function can even be dis-
abled .
For details, see Key Operator. p.99

Energy Saver

If the copier is shut down when it is not
in use, it takes the copier some time to
complete the warm-up cycle. Instead of
turning the copier OFF, it's a good idea
to use the energy saver mode which will
minimize the time for the copier to com-
plete the warm-up cycle to about 30 sec.
To see the copier into the Energy Saver
mode, you need only to press the Energy
Saver ky. Or, a given period of time
after the copier has been toucher last, it
automatically enters the Energy Saver
mode, The initial setting is 15 min.
To cancel the Energy Saver mode, press
any key on the control panel.
Useful Tip: The time for the copier to
enter the Energy Saver mode can be
selected from 1 to 120 min.
For details, see Key Operator. p.86
Note: The copier is automatically shut
down if the Auto Power-OFF function is
activated while it is in the Energy Saver
mode.