Image Density - imagistics C400 Operating Manual

3
Chapter

Image Density

When you touch Exposure on the Touch Panel, a screen appears that allows you to set the exposure level or image
density. You have a choice of three different ways to adjust the exposure level: Auto Exposure, Manual Exposure, or
Photo mode. Select the appropriate mode according to your particular needs.
Auto Exposure
In the Auto Exposure mode, the copier automatically adjusts the expo-
sure level for the optimum copy image density.
1
1
Useful Tips
The exposure level in the Auto Exposure mode can be made either
darker or lighter by using the Key Operator feature. p. 85
The copier has been factory-set to automatically select the Auto
Exposure mode. The Key Operator feature can be used to change
this default setting to the Manual Exposure mode. p. 85
Manual Exposure
In the Manual Exposure mode, you can vary the exposure level in nine steps.
1
1
40
Making Copies
Touch Auto
The Auto key is highlighted
indicating the copier is set to
the Auto Exposure mode.
Touch Lighter or Darker
to adjust the image density.