Batch; Hole Punch - imagistics C400 Operating Manual

3
Making Copies
Chapter
Finishing Mode

Batch

Copies
Originals

Hole Punch

Originals
Hole Punch
Copies
Originals
Useful Tip:
The copier has been factory-set to automatically select Non-Sort in the initial
mode. Also, the copier automatically switches between Sort and Non-Sort
depending on the number of originals loaded in the document feeder and the
number of copies to be made. The Key Operator feature can be used to
change these default settings. pp. 85, 86
49
The copies made from each
single original are separated
into Batches. Each Batch
1st Bin
contains the same number
of copies.
2nd Bin
A Sorter Stapler must be
installed.
3rd Bin
Holes are punched in the
Copies
copy sets or stacks for filing.
It can be combined with
1st Bin
Non-Sort, Sort, Sort Staple,
or Batch.
2nd Bin
A Sorter or Sorter Stapler
must be installed.
3rd Bin
This function allows you to
staple copy sets already
made in the Sort mode or
Sorting or Batching
copy stacks made in the
Batch mode.
A Sorter or Sorter Stapler
must be installed.