Placing Originals On The Original Glass - imagistics C400 Operating Manual

3
Chapter

Placing Originals on the Original Glass

Use the instructions below to insure proper handling of the original.
Sheet Originals
1
1
2
2
3
3
Highly Transparent Originals
1
1
29
Making Copies
Raise the Original Cover and
place the original face down
on the Original Glass.
Align the rear left corner of
the original with the marker
on the Original Width Scale.
Then, press the rear edge of
the original up against the
Original Positioning Plate at
the rear side of the Original
Glass.
Gently lower the Original Cover.
Notes:
•The original size that can be detected
in the Auto Paper Select Mode are 11"
X 17" ,Legal L, Letter L, Letter C.
When making copies from originals
other that the above, select the copy
paper size.
•When using wrinkled or curled origi-
nals,
the original size might not be detected
correctly. So, select the copy paper
size and do not use the AutoPaper Select
(Using transparencies and translucent
paper for the original)
•Place the original in the same
way as the sheet originals.
•Place a blank sheet of paper
of the same size as the origi nall
over the original.
Highly Transparent Originals