imagistics C400 Operating Manual page 72

3
Making Copies
Chapter
Specifying the Insert Location
In the Page Insertion mode, you must specify where to place an insert. Two ways are available to specify the insert
places, either ADF Detection or 10-Key Input.
ADF Detection: (automatic detection)
To specify the location where you want the copier to place the insert, place an
odd sized piece of paper in your originals. If you want to copy on the special
insert paper, the "marker sheet" should be placed before the original that you
are copying onto the insert.
Original Set
Insert Marker
between pages
1 and 2
Note:
ADF Detection cannot be used when the Mixed Original Detection
mode is on. See page 27
10 Key Input
Using the 10-Key Pad, define the places for inserts. p. 66
Up to 20 places can be defined.
63
Copy Set
Original Set
1 2 3
2
6 7
11
Copy Set
Copied Insert
Copy Set
1 2 3
4 5 6
7 8 9
Copied Insert
Non-Copied Insert
Copy Set
Non-Copied
Insert
1149O049AA