Terms And Symbols For The Type Of Originals And Copy Paper - imagistics C400 Operating Manual

Terms and Symbols for the Type of Originals and Copy Paper

A few special and terms symbols are used in this manual to designate types of originals and copy paper.
This page explains about these terms and symbols
Feeding Direction (copy paper path)
In this copier system copy paper is taken up from the right-hand side of the copier and fed through the copier toward the
left-hand side, face up onto the Copy Tray. In the figure below, the direction in which the copy paper, as indicated by the
arrow, is called the "feeding direction."
"Width" and "Length"
Terms and Symbols
viii
When we talk about the size of the original or
copy, we call side A "width" and side B "length."
A: Width
B: Length
Lengthwise
When the original or copy has a "length longer
than its "width," we call it "lengthwise" and use
symbol "L" or this symbol
Crosswise
When the original has a "length" shorter than its
"width", it is called crosswise and is represented
by this paper symbol