imagistics C400 Operating Manual page 63

3
Making Copies
Chapter
Instructions for Loading Originals When Using the Finishing Mode
Note the correct direction of the originals if the copies are to be stapled either in Sort Staple or Manual Staple Mode.
Using the RADF (Reversing Automatic Document Feeder)
Load the originals crosswise in the document feeder. Make sure the stapling position is located as shown below.
Correct:
Originals Loaded Crosswise
Stapling Position
Placing an Original on the Glass
Place the original face down with the stapling position in the upper right hand corner.
Use the Manual Staple function to staple copies after they have been made.
Correct:
54
Copies
Stapling Position