Key Operator - imagistics C400 Operating Manual

4
Using the Programming Mode
Chapter

Key Operator

The copier has been set so that the most frequently used settings are automatically selected in the initial mode.
The Key Operator feature allows you to select the default settings which are automatically selected
in the initial mode according to your own needs. By setting defaults that are most frequently used, time and effort to
make extra settings will be eliminated when the copier is turned ON or when the control panel is reset to the normal
mode.
Mixed Orig. Detection:
1/6
Select whether to enable ("ON") the Mixed Original
Detection mode or not ("OFF") when power is turned ON or
when the control panel is reset.
The initial setting is "OFF."
Language Selection:
Select the language of the Touch Panel messages, either
English or French.
The initial setting is English.
Paper Priority
Specify the paper source selected automatically.
Copy Mode Priority
Specify the default mode selected automatically when power
is turned ON or panel reset, either "Auto Paper," "Auto Size,"
or "Manual."
The initial setting is "Auto Paper."
Manual Feed Expansion
Select whether to enable (ON) the size input for manual
bypass paper or not (OFF). When the function is turned
"ON," Auto Paper, Auto size, Finishing, 2-sided Copying,
Margin-by-Reduction, Erase, 1[2in1] ➧ 1, and 2 [2in1] ➧ 1
can be used.
84
A listing of Key Operator
functions is given in six
pages of menu, from
1/6 to 6/6
To show the listing of each
page, touch the desired
page number key at the bot-
tom of the Touch Panel.