Using The Radf - imagistics C400 Operating Manual

3
Making Copies
Chapter
Instructions for Loading Originals When Using the Finishing Mode
Note the correct direction of the originals if the copies are to be hole punched in any of the Finishing Modes.

Using the RADF

Load the originals face up as shown below. Holes will be punched on the left hand side of the copies
Correct:
Originals
Hole Punch Position
Placing an Original on the Glass
Place the original face down with the hole punch position on the right side.
Correct:
Originals
55
Hole Punch Position
Copies
Copy