Manual Bypass Copying - imagistics C400 Operating Manual

3
Chapter

Manual Bypass Copying

Use the Manual Bypass to make copies on paper not loaded in any drawer, or to copy onto transparencies,
translucent paper, or any other special paper. When using the Multi Bypass Tray, you can load multiple sheets
of copy paper.
Non-Sort and 1-Sided
Type of Paper, Plain paper
Paper (weighing 16 to 24 lbs.)
Heavyweight paper
(weighing 24 to 42 lbs.)
Paper 5-1/2" 8-1/2"L to 11" 17"L
Size
Width : 4" to 11-3/4"
Length : 5-1/2" to 17", 5-
Capacity Plain Paper Up to 50 sheets
Plain Paper (once-copied paper) Up to 20 sheets
Thick paper, transparencies, translucent paper Up to20 sheets
1
1
2
2
3
3
32
Making Copies
2-Sided Copy
Plain paper
(weighing 16 to 24 lbs.)
Heavyweight paper
(weighing 24 to 42 lbs.)
5-1/2" 8-1/2"L to 11" 17"L
1/2"
Sort/Batch/Staple/Punch
Plain paper
(weighing16 to 24 lbs.)
Sort/Group 5-1/2" X 8-1/2"L to
11" X17"L
Staple : Letter to 11" X 17"L
Punch : Letter C, 11" X 17"
Place the original on the Original Glass
and make the control panel settings.
Note: The following functions cannot be
selected for Manual Bypass if "Manual Feed
Expansion" of Key Operator has been turned
"OFF" : Auto Size, Auto paper, Finishing, and
2-sided copying, Margin-by-Reduction,
➧
1[2in1] 1 and 2 [2in1]
Swing down the Multi
Bypass Tray and slide the
Paper Guide Plate to the
size of the copy paper.
Place a neat stack of copy
paper on the Table and insert it
into the copier until it stops.
Note:
•Before inserting, fan the paper
stack well if you are using transparen-
cies or translucent paper.
•Correct any curl if you are using
heavyweight paper.
•When using once-copied paper, load
the paper stack so that the blank side
faces up.
➧
1.