imagistics C400 Operating Manual page 51

3
Chapter
Selecting the Original ➧ Copy Type
In the following pages, let's look at how we should make the settings for the type of copy we want to make from the type
of original we have.
When you touch Orig
➧
1 1
Original
➧
1 2
Original
➧
2 1
Original
➧
2 2
Original
1➧[2in1]
Original
42
Making Copies
➧
Copy on the Touch Panel, a screen appears that allows you to set the orig. copy type.
Copy
Copy
Copy
Copy
Copy
➧
Select 1 1 to make 1-sided copies from
1-sided originals.
When a Duplex Unit is installed.
➧
Select 1 2 to make 2-sided copies from
1-sided originals.
Two originals can be copied onto one
copy.
When an RADF (Reversing Automatic
Document Feeder) is installed.
➧
Select 2 1 to make 1-sided copies from
2-sided originals.
When an RADF and Duplex Unit are
installed.
➧
Select 2 2 to make 2-sided copies from
2-sided originals.
When an an RADF is installed.
➧
Select 1 [2in1] to make a 1-sided copy,
through reduction, from two 1-sided
originals side-by-side.
This uses half the copy paper as regular
copying.
Note: The size of the original should be
Letter crosswise for 2-in-1.