Assigning A Static Ip Address To The Sp - Sun Oracle SPARC T4-4 Installation Manual

IPv6?
Security Policy
Confirm
Name Service
NFSv4 Domain Name
Time Zone (Continent)
Time Zone (Country or
Region)
Time Zone
Date and Time
root Password
Related Information
"Rear Panel Cable Connections Reference" on page 24
■
"Assigning a Static IP Address to the SP" on page 50
■
"Boot the Oracle Solaris Operating System" on page 56
■
"Booting the Oracle Solaris Operating System" on page 55
■

Assigning a Static IP Address to the SP

If your network does not use DHCP, the network management port is not operational
until you configure network settings for the service processor.
This topic includes the following tasks:
"Oracle ILOM System Console Overview" on page 51
■
"Log In to the SP (SER MGT Port)" on page 51
■
"Assign a Static IP Address to the NET MGT Port" on page 52
■
50 SPARC T4-4 Server Installation Guide • May 2014
Specify whether or not to use IPv6. If you are not sure, select No to configure the
Ethernet interface for IPv4.
Select either standard UNIX security (No) or Kerberos Security (Yes). If you are not
sure, select No.
Review the onscreen information and change it if needed. Otherwise, continue.
Select the name service according to your network environment.
Note-If you select a name service other than None, you will be prompted for
additional name service configuration information.
Select the type of domain name configuration according to your environment. If
you are not sure, select Use the NFSv4 domain derived by the server.
Select your continent.
Select your country or region.
Select the time zone.
Accept the default date and time or change the values.
Type the root password twice. This password is for the superuser account for the
Oracle Solaris OS on this server. This password is not the SP password.