Sun Oracle SPARC T4-4 Installation Manual page 66

2. Switch from the system console prompt to the service processor console prompt
by issuing the console escape sequence (by default, #.).
ok #.
->
3. Using the ILOM CLI, type the stop /SYS command to perform a graceful
shutdown of the server.
-> stop /SYS
Are you sure you want to stop /SYS (y/n)? y
Stopping /SYS
->
Note – To perform an immediate and ungraceful shutdown, use the stop -force
-script /SYS or stop -script /SYS commands. These commands stop
everything immediately. Ensure that all data is saved before entering these
commands.
4. Type the start /SYS command.
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS
->
Note – To force a power-on sequence, use the start -script /SYS command.
5. Reconnect to the system console with the start /HOST/console command.
-> start /HOST/console
Are you sure you want to start /HOST/console (y/n)? y
Serial console started.
The system console displays various messages, followed by the ok prompt.
58 SPARC T4-4 Server Installation Guide • May 2014
To stop, type #.