Pitney Bowes DM300c series Operator's Manual page 21

1. Feeder Cover—Lift to gain access to the feed and transport
mechanisms.
2. Seal/ No Seal Lever— Selects whether your envelopes are
automatically sealed or not.
3. LED—lights green when your system is on; lights orange when
your system is in "sleep" mode.
4. Ink Access Cover—opens up to allow replacement of the ink
cartridge. See Chapter 7, Maintenance for instructions.
5. Weighing Platform—allows you to weigh and calculate postage
of a mail piece based on the service selected.
6. Control Panel—allows you to enter and setup information on
your machine.
7. Printer Clearance Lever (two position)
Home - transport rollers engaged for processing mail (normal)
Released - transport rollers disengaged so you can clear a
stalled mail piece.
NOTE: The machine will not process mail when left in the
released position.
8. Moistener—applies sealing fluid to the envelope flap. You can
seal envelopes or leave them unsealed, depending on how you
feed them.
9. Tape Feeder—holds and feeds tapes for printing.
10. Feed Deck—supports your envelope, post card or tape sheet as
it passes under the printer mechanism.
11. Stacker Tray—allows the neat stacking of finished mail pieces.
12. Qwerty Keyboard (under cover) —For entry of information.
SDC755A
2 • Getting to Know Your System
2-5