Pitney Bowes DM300c series Operator's Manual page 82

7 • Maintenance
Replacing the Ink Cartridge/Printhead (continued)
5B. While squeezing, lift and tilt to the
right the printhead. The printhead
should come up out of the machine.
5C. Remove the protective tape
from the bottom of the new
printhead.
5D. Squeeze the two grey tabs on either
side of the new printhead and slightly
angle the printhead while sliding it
back into its holder.
5E. Push the printhead back into
place. You should hear a click
when it is seated correctly.
5F. Replace the ink cartridge. Follow
steps 6 onwards in this chapter for
more information.
7-4 SDC755A